0.91'' OLED Graphic Display 128×32 SSD1316BZ | Sinocrystal
skip to Main Content

0.91” OLED Graphic Display With 128×32 Resolution SSD1316BZ IC,15PIN, 4 Wire Serial Interface

SCE091003-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306BZ IC, 4 wire serial interface, 15PIN

SKU: SCE091003-V01
Type: OLED
Mode: -
Product No.: SCE091003-V01
Size: 0.91''
Resolution: 128*32
Outline Dimension: 30.0*11.50*1.227
Active Area: 22.384*5.584
Interface: 4-wire SPI
IC: SSD1306BZ
Brightness: -
Touch Screen: No
View Direction: -
Pin No.: 15
Shape: Rectangle

Description

                          Drawing

 

 

 

 

                         General Specification

 

ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 30.0(W)x11.5(H)x1.227(D) mm
  VIEWING AREA 24.384 (W) x 7.584(H) mm
  ACTIVE AREA 22.384 (W) x5.584(H) mm
  DOT SIZE 0.159(W) x0.159(H) mm
  DOT PITCH 0.175(W) x0.175 (H) mm
  ASSY.TYPE COG
  WEIGHT TBD

 

 

 

                         Interface Definition

 

PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 C2P C1P/C1N-Pin for charge pump capacitor.
C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
2 C2N
3 C1P I
4 C1N
Power supply for charge pump regulator circuit.
5 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
6 VSS P Ground pin. It must be connected to external ground.
7 VDD P Power pin for logic circuit. It must be connected to external source.
8 CS# I Chip Select input pin. Active “L”
9 RES# I Hardware reset input pin. Active “L”.
10 DC# I This is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command.
11 SCLK I 4 wire serial interface clock wire
12 SDIN I 4 wire serial interface data wire
13 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
14 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
15 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.
Back To Top
Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
News
Our policies