How to Use Conductive Adhesive Strips on LCD Display

LCD conductive adhesive strip use and its related matters

Method of use and its related matters.

1. The connection requires a structural part to hold the LCD display together with the conductive adhesive strip and the PCB version. Conductive adhesive strip, conductive strip, conductive silicone strip are the common names for conductive silicone connectors.
2. Does not require any soldering, thus eliminating damage to thermally efficient devices. Instead of soldering, conductive silicone rubber can be used to connect some electronic components that are vulnerable to heat.
3. Can also be used in high temperature and radiation occasions instead of welding, when the conductive silicone rubber not only provides a good electrical conductivity of the same circuit, but also makes the connection point in a sealed state, to play a moisture-proof, anti-corrosion role; “zero ringing force” to eliminate the breakage of the LCD glass; will not damage the contact surface;
4. It forms an airtight seal that protects the printed circuit board from atmospheric corrosion in adverse environments and ensures a good connection; it is cushioned and shockproof; it is easy to adapt to a wide range of contact methods; and the display can be inserted or removed several times.
5. Cut a small piece of conductive tape to repair the position of the electrical contact like the remote control, for the battery electrode like the remote control where the iron is easier to be corroded, if you use a little conductive tape in the electrode, one will not rust, two and can be waterproof, three replacement is also convenient, not a good choice.

Caution!
Because the electrode pitch can be made very small, so suitable for products with a large number of drive paths, inexpensive, can help reduce costs; soft and flexible, easy to align, mainly used for signal connection between the LCD display and the PCB board, with good conductivity and stability.
In our use of conductive tape, we must pay attention to bring insulating gloves before operating. Although the conductive tape itself is not conductive, it does not mean that the objects connected to the conductive tape are not conductive.
There is also a point to be vigilant attention is to ensure that the conductive tape connected to the object completely isolated from the power supply and then carefully operated, otherwise it will happen that a small electric shock, a large explosion of the situation Oh!