0,96-дюймовый вертикальный OLED-дисплей 64x128 | Sinocrystal

0,96-дюймовый вертикальный OLED-дисплей 64×128 с микросхемой SH1107, 13-контактный, 4-проводный последовательный интерфейс, I2C

SCE096013-V01 — это вертикальный OLED-дисплей с типом COG, разрешением 64×128, микросхемой SH1107, последовательным интерфейсом 4wire, I2C, 13PIN

Inquiry Now
SKU: SCE096013-V01
Тип: OLED
Mode: -
Product No.: SCE096013-V01
Size: 0.96''
Resolution: 64*128
Outline Dimension: 14*28*1.227
Active Area: 10.86*21.74
Interface: I2C/ 4-wire SPI
IC: SH1107
Brightness: -
Touch Screen: No
View Direction: -
Pin No.: 13
Shape: Rectangle

Описание

                        рисунок

 

 

 

 

                         Основные Характеристики

 

ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 24.74(W)x16.9(H)x1.42(D) mm
  VIEWING AREA 22.74 (W) x 11.86(H) mm
  ACTIVE AREA 21.74 (W) x10.86(H) mm
  DOT SIZE 0.15(W) x0.15(H) mm
  DOT PITCH 0.17(W) x0.17 (H) mm
  ASSY.TYPE COG —
  WEIGHT TBD

 

 

 

                         Определение интерфейса

 

PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 NC(GND) P It should be connected to external ground.
2 C2P C1P/C1N-Pin for charge pump capacitor.
C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
3 C2N
4 C1P I
5 C1N
6 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
7 NC NC
8 VSS P Ground pin. It must be connected to external ground.
9 VDD P Power pin for logic circuit. It must be connected to external source.
10 BS0 I Interface selection pins.

 

BS0 BS1
I2C 0 1
3-wire SPI 1 0
4-wire SPI 0 0
11 BS1
12 NC NC.
13 CS# I Chip Select input pin. Active «L»
14 RES# I Hardware reset input pin. Active «L».
15 D/C# I This is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section.
When 3-wire serial interface is selected, this pin must be connected to VSS
16 NC NC.
17 NC NC.
18 D0 I/O When serial interface mode is selected,D2 should be either tied LOW or tied together with D1 as the serial data input: SDIN, and D0 will be the serial clock input: SCLK.
When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0
is the serial clock input, SCL.
19 D1
20 D2
22 NC NC.
23 NC NC.
24 NC NC.
25 NC NC.
26 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
27 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
28 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.
29 VLSS P This is an analog ground pin. It should be connected to VSS externally.
30 NC(GND) P It should be connected to external ground.

Детали

P-Type

mode

Product No.

SCE096013-V01
Size

Resolution

outline dimension

Active Area

IC

Brightness

Touch Screen

View Direction

Pin No

Shape

interface

Похожие товары

Back To Top