15 – Sinocrystal https://sinocrystal.net Fri, 25 Feb 2022 08:53:54 +0000 en-US hourly 1 https://wordpress.org/?v=5.3.15 https://sinocrystal.net/wp-content/uploads/2020/06/logo_small-100x100.png 15 – Sinocrystal https://sinocrystal.net 32 32 2.4″ Color Display 2.4 Inch Small TFT LCD Displays with SPI interface and ILI9341V lcd screen https://sinocrystal.net/product/2-4-color-display-2-4-inch-small-tft-lcd-displays-with-spi-interface-and-ili9341v-lcd-screen Mon, 25 Jan 2021 08:45:17 +0000 https://sinocrystal.net/?post_type=product&p=5013 SCT024013-V03 is a 2.4'' TFT LCD Display with 240RGB*320 resolution, it built in with ILI9341V IC, and it supports 3-line SPI interface, 15 PIN, 12 o'clock View direction. We provide Customized TFT LCD services.

The post 2.4" Color Display 2.4 Inch Small TFT LCD Displays with SPI interface and ILI9341V lcd screen first appeared on Sinocrystal.

]]>                          Drawing

 

 

 

 

 

 

                         General Specification

 

Item Nominal Dimension Unit
  Dot Matrix 240 x RGB x 320 Dots
  Module Size ( W×H×T ) 42.72 x 60.26 x 3.4 mm.
  Active Area ( W×H ) 36.72 x 48.96 mm.
  Pixel arrangement RGB Stripe mm.
  Dot Pitch ( W×H ) 0.153 x 0.153 mm.
  Color depth 262K(MAX) colors
  Interface 3-line SPI –
  Drive IC ILI9341V –
  Operating temperature -20 ~70 ºC
  Storage temperature -30~80 ºC
  LCD Type a-Si TFT –
  LCD Mode TN/Normal White –
  Backlight Type LED x 4 PCS

 

 

 

 

 

                         Interface Definition

 

Pin No

Pin Symbol

 Level Description
1 CSX 0V Chip select
2 SDA H/L SPI data
3 SCL H/L SPI clock
4 NC –
5 NC –
6 NC –
7 NC –
8 VCC 2.8-3.2V Power supply
9 LEDA – LED light, anode
10 LEDK1 – LED light, cathode.
11 LEDK2 – LED light, cathode.
12 LEDK3 – LED light, cathode.
13 LEDK4 – LED light, cathode.
14 RESET H/L Reset signal
15 GND 0V Ground

 

Focus Keyword:lcd spi interface,color tft lcd display,ili9341 screen,tft lcd ili9341,ili9341 2.4

The post 2.4" Color Display 2.4 Inch Small TFT LCD Displays with SPI interface and ILI9341V lcd screen first appeared on Sinocrystal.

]]> 0.96” 128×64 OLED With SSD1316 IC, 15PIN, 4 SPI Interface https://sinocrystal.net/product/0-96-128x64-oled-with-ssd1316-ic-15pin-4-spi-interface Thu, 13 Aug 2020 06:55:26 +0000 https://www.sinocrystal.net/?post_type=product&p=1554 SCE096006-V01 is a OLED Display with COG Type, 128×64 Resolution, SSD1306 IC, 4 SPI interface, 15PIN

The post 0.96'' 128×64 OLED With SSD1316 IC, 15PIN, 4 SPI Interface first appeared on Sinocrystal.

]]>  

 

                         General Specification

 

 

ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 26.7(W)x19.26(H)x1.227(D) mm
  VIEWING AREA 23.74 (W) x 13.2(H) mm
  ACTIVE AREA 21.74(W) x11.2 (H) mm
  DOT SIZE 0.15(W) x0.15(H) mm
  DOT PITCH 0.17(W) x0.17 (H) mm
  ASSY.TYPE COG —
  WEIGHT TBD

 

 

 

 

 

                         Interface Definition

 

 

PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 NC(GND) P It should be connected to external ground.
2 C2P C1P/C1N-Pin for charge pump capacitor.
C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
3 C2N
4 C1P I
5 C1N
6 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
7 NC NC
8 VSS P Ground pin. It must be connected to external ground.
9 VDD P Power pin for logic circuit. It must be connected to external source.
10 BS0 I Interface selection pins.

I2C 6800 8080 4SPI
BS0 0 0 0 0
BS1 1 0 1 0
BS2 0 1 1 0
11 BS1
12 BS2
13 CS# I Chip Select input pin. Active “L”
14 RES# I Hardware reset input pin. Active “L”.
15 D/C# I This is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section.
When 3-wire serial interface is selected, this pin must be connected to VSS
16 R/W# I This is read/write control input pin.
8080: data write enable; 6800: read/write select pin.
When serial or I2C interface is selected, this pin must be connected to VSS.
17 E# I This is read/write control input pin.
8080: data read enable; 6800: read/write enable pin.
When serial or I2C interface is selected, this pin must be connected to VSS.
18 D0 I/O These are 8-bit bi-directional data bus to be connected to microprocessor’s Data bus.
When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK.
When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.
19 D1
20 D2
21 D3
22 D4
23 D5
24 D6
25 D7
26 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
27 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
28 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.
29 VLSS P This is an analog ground pin. It should be connected to VSS externally.
30 NC(GND) P It should be connected to external ground.

The post 0.96'' 128×64 OLED With SSD1316 IC, 15PIN, 4 SPI Interface first appeared on Sinocrystal.

]]> 0.91” OLED Graphic Display With 128×32 Resolution SSD1316BZ IC,15PIN, 4 Wire Serial Interface https://sinocrystal.net/product/0-91-oled-graphic-display-with-128x32-resolution-ssd1316bz-ic15pin-4-wire-serial-interface Thu, 13 Aug 2020 06:38:05 +0000 https://www.sinocrystal.net/?post_type=product&p=1542 SCE091003-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306BZ IC, 4 wire serial interface, 15PIN

The post 0.91'' OLED Graphic Display With 128×32 Resolution SSD1316BZ IC,15PIN, 4 Wire Serial Interface first appeared on Sinocrystal.

]]>                           Drawing

 

 

 

 

                         General Specification

 

ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 30.0(W)x11.5(H)x1.227(D) mm
  VIEWING AREA 24.384 (W) x 7.584(H) mm
  ACTIVE AREA 22.384 (W) x5.584(H) mm
  DOT SIZE 0.159(W) x0.159(H) mm
  DOT PITCH 0.175(W) x0.175 (H) mm
  ASSY.TYPE COG —
  WEIGHT TBD

 

 

 

                         Interface Definition

 

PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 C2P C1P/C1N-Pin for charge pump capacitor.
C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
2 C2N
3 C1P I
4 C1N
Power supply for charge pump regulator circuit.
5 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
6 VSS P Ground pin. It must be connected to external ground.
7 VDD P Power pin for logic circuit. It must be connected to external source.
8 CS# I Chip Select input pin. Active “L”
9 RES# I Hardware reset input pin. Active “L”.
10 DC# I This is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command.
11 SCLK I 4 wire serial interface clock wire
12 SDIN I 4 wire serial interface data wire
13 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
14 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
15 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.

The post 0.91'' OLED Graphic Display With 128×32 Resolution SSD1316BZ IC,15PIN, 4 Wire Serial Interface first appeared on Sinocrystal.

]]> 0.87” OLED Graphic Display With 128×32 Resolution SSD1316Z IC,15PIN, 4-Wire SPI Interface https://sinocrystal.net/product/0-87-oled-graphic-display-with-128x32-resolution-ssd1316z-ic15pin-4-wire-spi-interface Thu, 13 Aug 2020 06:29:40 +0000 https://www.sinocrystal.net/?post_type=product&p=1538 SCE087001-V01 is a OLED Display with COG Type, 128×32 Resolution, SSD1306Z IC, 4-wire SPI interface, 15PIN

The post 0.87'' OLED Graphic Display With 128×32 Resolution SSD1316Z IC,15PIN, 4-Wire SPI Interface first appeared on Sinocrystal.

]]>                           Drawing

 

 

 

 

                         General Specification

 

ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 29.0(W)x8.7(H)x1.22(D) mm
  VIEWING AREA 22.856 (W) x 6.824(H) mm
  ACTIVE AREA 21.356 (W) x5.324(H) mm
  DOT SIZE 0.147(W) x0.147(H) mm
  DOT PITCH 0.167(W) x0.167 (H) mm
  ASSY.TYPE COG —
  WEIGHT TBD

 

 

 

                         Interface Definition

 

PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 C2N C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
2 C2P
3 C1P O
4 C1N
5 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used.
It must be floated when charge pump is not used.
6 VSS P Ground pin. It must be connected to external ground.
7 VDD P Power pin for logic circuit. It must be connected to external source.
8 CS# I Chip Select input pin. Active “L”
9 RES# I Hardware reset input pin. Active “L”.
10 D/C# I This pin is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command.
11 SCLK I/O Serial interface clock wire
12 SDIN I/O Serial interface data wire
13 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. When external IREF is used, A resistor should be connected between this pin and VSS .
Set the current at 10 uA maximum.
14 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
15 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.

The post 0.87'' OLED Graphic Display With 128×32 Resolution SSD1316Z IC,15PIN, 4-Wire SPI Interface first appeared on Sinocrystal.

]]> 1602 Character LCD Display COG w/o Backlight https://sinocrystal.net/product/1602-character-lcd-display-cog-w-o-backlight Wed, 12 Aug 2020 09:16:13 +0000 https://www.sinocrystal.net/?post_type=product&p=1438 SC1602013-V01 is a Character LCD Display with 16*2 resolution, it built in with ST7032-0D IC, 15 PIN, 6 o'clock View direction

The post 1602 Character LCD Display COG w/o Backlight first appeared on Sinocrystal.

]]>

 

                         Drawing

 

 

1602 Character LCD Display

 

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
  NUMBER OF CHARACTER Character LCD 16×2 Mm
  MODULE DIMENSION 65.0×27.7×10.6(MAX) Mm
  VIEWING AREA 61.0×15.7 Mm
  DOT SIZE 0.55×0.65 Mm
  DOT PITCH 0.60×0.65 Mm
  LCD TYPE STN/GRAY/POSITIVE/REFLECTIVE
  DUTY 1/16
  VIEWING DIRECTION 6:00 o’clock
  BACK LIGHT TYPE/BACK LIGHT COLOR NO BACKLIGHT
  APPROX. WEIGHT TBD G

 

 

 

                         Interface Definition

 

Pin No. Symbol Level Description
1 RS H/L Register selection input
H : Indicate that DB0 to DB7 are display data.
L : Indicate that DB0 to DB7 are control data
2 RW H/L Read or Write signal
0 : Write
1 : Read
3 E H/L Enable signal
4–11 DB0-DB7 H/L 8-bit bi-directional data bus
12 GND — Gound
13 VDD — Supply voltage for logic
14 V0 — Supply voltage for LCD
15 FGND — Frame Ground

The post 1602 Character LCD Display COG w/o Backlight first appeared on Sinocrystal.

]]> 2.4'' Touch Screen LCD With 240RGB*320 3-Line SPI Interface ILI9341V IC https://sinocrystal.net/product/2-4-touch-screen-lcd-with-240rgb320-3-line-spi-interface-ili9341v-ic Tue, 11 Aug 2020 08:19:26 +0000 https://www.sinocrystal.net/?post_type=product&p=1347 SCT024013-V04 is a 2.4'' TFT LCD Display with 240RGB*320 resolution, it built in with ILI9341V IC, and it supports 3-line SPI interface, 15 PIN, 12 o'clock View direction. We provide Customized TFT LCD services.

The post 2.4'' Touch Screen LCD With 240RGB*320 3-Line SPI Interface ILI9341V IC first appeared on Sinocrystal.

]]>                          Drawing

 

 

 

 

 

 

                         General Specification

 

Item Nominal Dimension Unit
  Dot Matrix 240 x RGB x 320 Dots
  Module Size ( W×H×T ) 42.72 x 60.26 x 3.4 mm.
  Active Area ( W×H ) 36.72 x 48.96 mm.
  Pixel arrangement RGB Stripe mm.
  Dot Pitch ( W×H ) 0.153 x 0.153 mm.
  Color depth 262K(MAX) colors
  Interface 3-line SPI –
  Drive IC ILI9341V –
  Operating temperature -20 ~70 ºC
  Storage temperature -30~80 ºC
  LCD Type a-Si TFT –
  LCD Mode TN/Normal White –
  Backlight Type LED x 4 PCS

 

 

 

 

 

                         Interface Definition

 

Pin No Pin Symbol Type Description
1 CSX 0V Chip select
2 SDA H/L SPI data
3 SCL H/L SPI clock
4 YD – Touch panel bottom electrode
5 XR – Touch panel right electrode
6 YU – Touch panel top electrode
7 XL – Touch panel left electrode
8 VCC 2.8-3.2V Power supply
9 LEDA – LED light, anode
10 LEDK1 – LED light, cathode.
11 LEDK2 – LED light, cathode.
12 LEDK3 – LED light, cathode.
13 LEDK4 – LED light, cathode.
14 RESET H/L Reset signal
15 GND 0V Ground

 

Focus Keyword:lcd spi interface,color tft lcd display,ili9341 screen,tft lcd ili9341,ili9341 2.4

The post 2.4'' Touch Screen LCD With 240RGB*320 3-Line SPI Interface ILI9341V IC first appeared on Sinocrystal.

]]>