56.4*36.8*5.5 – Sinocrystal https://sinocrystal.net Fri, 18 Dec 2020 07:31:49 +0000 en-US hourly 1 https://wordpress.org/?v=5.3.15 https://sinocrystal.net/wp-content/uploads/2020/06/logo_small-100x100.png 56.4*36.8*5.5 – Sinocrystal https://sinocrystal.net 32 32 12864 Graphic LCD Display With COG Type ST7565R IC White LED Backlight 30 PIN https://sinocrystal.net/product/12864-graphic-lcd-display-with-cog-type-st7565r-ic-white-led-backlight-30-pin Thu, 13 Aug 2020 01:37:51 +0000 https://www.sinocrystal.net/?post_type=product&p=1455 SC12864026-V30 is a graphic LCD display with a resolution of 128 * 64, which is equipped with ST7565R-G-1 IC, 30 PIN and 6 o'clock viewing direction.

The post 12864 Graphic LCD Display With COG Type ST7565R IC White LED Backlight 30 PIN first appeared on Sinocrystal.

]]>  

 

                         Drawing

 

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
 NUMBER OF GRAPHIC 128×64 Mm
 MODULE DIMENSION 56.4×36.8×5.5 Mm
 VIEWING AREA 51.0×23.8 Mm
 DOT SIZE 0.32×0.33 Mm
 DOT PITCH 0.35×0.36 Mm
 LCD TYPE FSTN/ POSITIVE/TRANSMISSIVE
 DUTY 1/64
 VIEWING DIRECTION 0.25 o’clock
 BACK LIGHT TYPE SIDE LIT LED
 BACK LIGHT COLOR WHITE
 APPROX. WEIGHT TBD G

 

 

 

                         Interface Definition

 

Pin No. Symbol Level Description
1 CS1 H/L Chip select signal
2 RST H/L Chip reset signal
3 A0 H/L Register selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
4 WR(R/W) H/L 8080 series: Write signal
6800 series: Read or Write signal
5 RD(E) H/L 8080 series: Read signal
6800 series: Enable signal
6–13 D0-D5
D6(SCL)
D7(SI)		 H/L This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) :
D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
14 VDD — Supply voltage for logic
15 VSS — Ground
16 VOUT — Power for LCD
17 C3+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
18 C1- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
19 C1+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
20 C2+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
21 C2- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
22-26 V4-V0 — This is a multi-level power supply for the liquid crystal drive.
27 VR — Contrast adjustment input.
28 C86 H/L C86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
29 PS H/L P/S = “H”: Parallel interface
P/S = “L”: Serial interface
30 IRS H/L RS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.

 

 

 

 

                         Keywords: lcd graphic 128×64, 128 64 lcd, 128×64 display, monochrome lcd, lcd 64×128

The post 12864 Graphic LCD Display With COG Type ST7565R IC White LED Backlight 30 PIN first appeared on Sinocrystal.

]]>