ST7565R – Sinocrystal https://sinocrystal.net Fri, 18 Dec 2020 07:31:49 +0000 en-US hourly 1 https://wordpress.org/?v=5.3.15 https://sinocrystal.net/wp-content/uploads/2020/06/logo_small-100x100.png ST7565R – Sinocrystal https://sinocrystal.net 32 32 13264 Dot Matrix Graphic Display With COG STN ST7565R IC 18 PIN https://sinocrystal.net/product/13264-dot-matrix-graphic-display-with-cog-stn-st7565r-ic-18-pin Thu, 13 Aug 2020 02:01:38 +0000 https://www.sinocrystal.net/?post_type=product&p=1471 SC13264005-V30 is a 2.12inch STN COG Graphic LCD Display with Y-G Positive Transmissive, ST7565R IC, 18 PIN

The post 13264 Dot Matrix Graphic Display With COG STN ST7565R IC 18 PIN first appeared on Sinocrystal.

]]>  

                         Drawing

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
NUMBER OF GRAPHIC 132×64 Mm
MODULE DIMENSION 57.5×41.7×8.1 Mm
VIEWING AREA 54.0×41.0 Mm
DOT SIZE 0.34×0.38 Mm
DOT PITCH 0.37×0.41 Mm
LCD TYPE STN/YELLOW-GREEN/POSITIVE/TRANSMISSIVE
DUTY 1/64
VIEWING DIRECTION 0.25 o’clock
BACK LIGHT TYPE SIDE LIT LED
BACK LIGHT COLOR WHITE
APPROX. WEIGHT TBD G

 

 

 

                         Interface Definition

 

NO SYMBOL LEVEL FUNCTION
1 CS1 H/L Chip select signal
2 RST H/L Chip reset signal
3 A0 H/L Register selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
4 D6(SCK) H/L D6 : the serial clock input (SCK)
5 D7(SDA) H/L D7 : serial data input (SDA) ;
6 VDD 3.3V Supply voltage for logic
7 VSS Ground Ground
8 VOUT — Power for LCD
9 C3+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
10 C1- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
11 C1+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
12 C2+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
13 C2- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
14-18 V4-V0 — This is a multi-level power supply for the liquid crystal drive.

 

 

 

 

 

                         Keywords: graphic lcd, 132×64 lcd, lcd 132×64, 132×64 dot matrix lcd display

The post 13264 Dot Matrix Graphic Display With COG STN ST7565R IC 18 PIN first appeared on Sinocrystal.

]]> Mono LCD 12864 Graphic Display With COG STN Y-G BL ST7565R IC 36 PIN https://sinocrystal.net/product/mono-lcd-12864-graphic-display-with-cog-stn-y-g-bl-st7565r-ic-36-pin Thu, 13 Aug 2020 01:52:38 +0000 https://www.sinocrystal.net/?post_type=product&p=1464 SC12864032-V02 ist ein grafisches LCD-Display mit einer Auflösung von 128 * 64, das mit dem IC ST7565R-G-1, 36 PIN und 6-Uhr-Blickrichtung ausgestattet ist.

The post Mono LCD 12864 Graphic Display With COG STN Y-G BL ST7565R IC 36 PIN first appeared on Sinocrystal.

]]>                          Drawing

 

 

 

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
 NUMBER OF GRAPHIC 128×64 Mm
 MODULE DIMENSION 71.0×51.8×8.5 Mm
 VIEWING AREA 60.77×32.93 Mm
 DOT SIZE 0.45×0.49 Mm
 DOT PITCH 0.476×0.515 Mm
 LCD TYPE STN/YELLOW-GREEN/POSITIVE/TRANSMISSIVE
 DUTY 1/64
 VIEWING DIRECTION 6 o’clock
 BACK LIGHT TYPE SIDE LIT LED
 BACK LIGHT COLOR WHITE
 APPROX. WEIGHT TBD G

 

 

 

                         Interface Definition

 

NO SYMBOL LEVEL FUNCTION
1–2 NC – No used
3 CS1 H/L Chip select signal
4 RST H/L Chip reset signal
5 A0 H/L Register selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
6 WR(R/W) H/L 8080 series: Write signal
6800 series: Read or Write signal
7 RD(E) H/L 8080 series: Read signal
6800 series: Enable signal
8–15 This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) : D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
16 VDD — Supply voltage for logic
17 VSS — Ground
18 VOUT — Power for LCD
19 C3+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
20 C1- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
21 C1+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
22 C2+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
23 C2- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
24 NC – No used
25-29 V4-V0 — This is a multi-level power supply for the liquid crystal drive.
30 VR — Contrast adjustment input.
31 NC – No used
32 C86 H/L C86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
33 PS H/L P/S = “H”: Parallel interface
P/S = “L”: Serial interface
34 NC – No used
35 IRS H/L RS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.
36 NC – No used

 

 

 

 

 

                         Keywords: 12864 lcd, lcd 128×64, 128×64, lcd 128×64 i2c, lcd 12864, 12864 cog lcd display fpc, fstn 128 64, mono lcd

The post Mono LCD 12864 Graphic Display With COG STN Y-G BL ST7565R IC 36 PIN first appeared on Sinocrystal.

]]> Graphic LCD Screen With 12864 Resolution COG ST7565R IC White LED 30 PIN https://sinocrystal.net/product/graphic-lcd-screen-with-12864-resolution-cog-st7565r-ic-white-led-30-pin Thu, 13 Aug 2020 01:47:47 +0000 https://www.sinocrystal.net/?post_type=product&p=1461 SC12864028-V02 is a graphic LCD display with a resolution of 128 * 64, which is with the IC ST7565R-G-1, 30 PIN and 6 o'clock viewing direction.

The post Graphic LCD Screen With 12864 Resolution COG ST7565R IC White LED 30 PIN first appeared on Sinocrystal.

]]>                          Drawing

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
 NUMBER OF GRAPHIC 128×64 Mm
 MODULE DIMENSION 71.00*51.80*6.80 Mm
 EFFECTIVE DISPLAY AREA 60.77×32.93 Mm
 DOT SIZE 0.45×0.49 Mm
 DOT PITCH 0.476×0.515 Mm
 LCD TYPE FSTN/POSITIVE/TRANSMISSIVE
 DUTY 1/64
 VIEWING DIRECTION 6 o’clock
 BACK LIGHT TYPE SIDE LIT LED
 BACK LIGHT COLOR WHITE
 APPROX. WEIGHT 85 G

 

 

 

                         Interface Definition

 

Pin No. Symbol Level Description
1 CS1 H/L Chip select signal
2 RST H/L Chip reset signal
3 A0 H/L Register selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
4 WR(R/W) H/L 8080 series: Write signal
6800 series: Read or Write signal
5 RD(E) H/L 8080 series: Read signal
6800 series: Enable signal
6–13 D0-D5
D6(SCL)
D7(SI)		 H/L This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) :
D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
14 VDD — Supply voltage for logic
15 VSS — Ground
16 VOUT — Power for LCD
17 C3+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
18 C1- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
19 C1+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
20 C2+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
21 C2- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
22-26 V4-V0 — This is a multi-level power supply for the liquid crystal drive.
27 VR — Contrast adjustment input.
28 C86 H/L C86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
29 PS H/L P/S = “H”: Parallel interface
P/S = “L”: Serial interface
30 IRS H/L RS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.

 

 

 

 

 

                         Keywords: lcd graphic display 128×64, 128×64 lcd i2c, 128×64 dot matrix lcd display, monochrome lcd display module, 12864 graphic lcd

The post Graphic LCD Screen With 12864 Resolution COG ST7565R IC White LED 30 PIN first appeared on Sinocrystal.

]]> 12864 FSTN Graphic LCD Screen With COG Type ST7565R IC White LED Backlight 30 PIN https://sinocrystal.net/product/12864-fstn-graphic-lcd-screen-with-cog-type-st7565r-ic-white-led-backlight-30-pin Thu, 13 Aug 2020 01:43:11 +0000 https://www.sinocrystal.net/?post_type=product&p=1458 SC12864028-V01 is a graphic LCD display with a resolution of 128 * 64, which is equipped with the IC ST7565R-G-1, 30 PIN and 6 o'clock viewing direction.

The post 12864 FSTN Graphic LCD Screen With COG Type ST7565R IC White LED Backlight 30 PIN first appeared on Sinocrystal.

]]>  

 

                         Drawing

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
 NUMBER OF GRAPHIC 128×64 Mm
 MODULE DIMENSION 71.8×52.6×6.8(MAX) Mm
 EFFECTIVE DISPLAY AREA 60.77×32.93 Mm
 DOT SIZE 0.45×0.49 Mm
 DOT PITCH 0.476×0.515 Mm
 LCD TYPE FSTN/POSITIVE/TRANSMISSIVE
 DUTY 1/64
 VIEWING DIRECTION 6 o’clock
 BACK LIGHT TYPE SIDE LIT LED
 BACK LIGHT COLOR WHITE
 APPROX. WEIGHT 85 G

 

 

 

                         Interface Definition

 

Pin No. Symbol Level Description
1 CS1 H/L Chip select signal
2 RST H/L Chip reset signal
3 A0 H/L Register selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
4 WR(R/W) H/L 8080 series: Write signal
6800 series: Read or Write signal
5 RD(E) H/L 8080 series: Read signal
6800 series: Enable signal
6–13 D0-D5
D6(SCL)
D7(SI)		 H/L This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) :
D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
14 VDD — Supply voltage for logic
15 VSS — Ground
16 VOUT — Power for LCD
17 C3+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
18 C1- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
19 C1+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
20 C2+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
21 C2- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
22-26 V4-V0 — This is a multi-level power supply for the liquid crystal drive.
27 VR — Contrast adjustment input.
28 C86 H/L C86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
29 PS H/L P/S = “H”: Parallel interface
P/S = “L”: Serial interface
30 IRS H/L RS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.

 

 

 

 

                         Keywords: graphic display, graphic lcd 128×64, 12864 lcd display, 12864 lcd datasheet, 128×64 glcd

The post 12864 FSTN Graphic LCD Screen With COG Type ST7565R IC White LED Backlight 30 PIN first appeared on Sinocrystal.

]]> 12864 Graphic LCD Display With COG Type ST7565R IC White LED Backlight 30 PIN https://sinocrystal.net/product/12864-graphic-lcd-display-with-cog-type-st7565r-ic-white-led-backlight-30-pin Thu, 13 Aug 2020 01:37:51 +0000 https://www.sinocrystal.net/?post_type=product&p=1455 SC12864026-V30 is a graphic LCD display with a resolution of 128 * 64, which is equipped with ST7565R-G-1 IC, 30 PIN and 6 o'clock viewing direction.

The post 12864 Graphic LCD Display With COG Type ST7565R IC White LED Backlight 30 PIN first appeared on Sinocrystal.

]]>  

 

                         Drawing

 

 

 

 

                         General Specification

 

ITEM STANDARD VALUE UNIT
 NUMBER OF GRAPHIC 128×64 Mm
 MODULE DIMENSION 56.4×36.8×5.5 Mm
 VIEWING AREA 51.0×23.8 Mm
 DOT SIZE 0.32×0.33 Mm
 DOT PITCH 0.35×0.36 Mm
 LCD TYPE FSTN/ POSITIVE/TRANSMISSIVE
 DUTY 1/64
 VIEWING DIRECTION 0.25 o’clock
 BACK LIGHT TYPE SIDE LIT LED
 BACK LIGHT COLOR WHITE
 APPROX. WEIGHT TBD G

 

 

 

                         Interface Definition

 

Pin No. Symbol Level Description
1 CS1 H/L Chip select signal
2 RST H/L Chip reset signal
3 A0 H/L Register selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
4 WR(R/W) H/L 8080 series: Write signal
6800 series: Read or Write signal
5 RD(E) H/L 8080 series: Read signal
6800 series: Enable signal
6–13 D0-D5
D6(SCL)
D7(SI)		 H/L This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) :
D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
14 VDD — Supply voltage for logic
15 VSS — Ground
16 VOUT — Power for LCD
17 C3+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
18 C1- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
19 C1+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
20 C2+ — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
21 C2- — DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
22-26 V4-V0 — This is a multi-level power supply for the liquid crystal drive.
27 VR — Contrast adjustment input.
28 C86 H/L C86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
29 PS H/L P/S = “H”: Parallel interface
P/S = “L”: Serial interface
30 IRS H/L RS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.

 

 

 

 

                         Keywords: lcd graphic 128×64, 128 64 lcd, 128×64 display, monochrome lcd, lcd 64×128

The post 12864 Graphic LCD Display With COG Type ST7565R IC White LED Backlight 30 PIN first appeared on Sinocrystal.

]]>